Product brand
Mini OBD 25K80
Product model
Mini OBD 25K80
Mini OBD2 Bluetooth 4.0 scanner with power switch, suitable for multi brand CAN-BUS, the same as ELM327 Bluetooth 4.0 with switch. Supports all OBD2 protocols applicable to IOS, Android, Symbian, and Windows. It is used to read common and manufacturer specific diagnostic trouble codes and display your meaning (over 3000 common code definitions in the database).
Mini OBD2 Bluetooth 4.0 scanner with power switch, suitable for multi brand CAN-BUS, the same as ELM327 Bluetooth 4.0 with switch.
Six reasons to obtain a Mini OBD2 Bluetooth 4.0 scanner with a power switch:
1. Software version: V2.1 (depending on the software)
2. Hardware version: V1.5
3. Applicable to all vehicles complying with the OBD II standard
4. Bluetooth
5. Support for four operating platforms (IOS, Android, Symbian, and Windows)
6. There is a power switch for turning on or off the power supply.
Supported protocols:
1.SAE J1850 PWM (41.6Kbaud)
2.SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2 (5 baud initialization, 10.4 Kbaud)
4. ISO14230-4 KWP (5 baud initialization, 10.4 Kbaud)
5. ISO14230-4 KWP (Fast Initialization, 10.4 Kbaud)
6.ISO15765-4 CAN (11bit ID, 500 Kbaud)
7.ISO15765-4 CAN (29bit ID, 500 Kbaud)
8.ISO15765-4 CAN (11bit ID, 250 Kbaud)
9.ISO15765-4 CAN (29bit ID, 250 Kbaud)
Mini OBD2 Bluetooth 4.0 Scanner with Switch Features:
1: Read generic and manufacturer specific diagnostic trouble codes and display their meanings (over 3000 generic code definitions in the database).
2: Clear the fault code and turn off the MIL ("Check Engine" light)
3: Display current sensor data, including:
4: Engine speed
5: Calculated load value
6: Coolant temperature
7: Fuel system status
8: Vehicle speed
9: Short term fuel correction
10: Long term fuel correction
11: Intake manifold pressure
12: Time advance
13: Intake air temperature
14: Air flow
15: Absolute throttle position
16: Oxygen sensor voltage/related short-term fuel correction
17: Fuel system status
18: Fuel pressure
19: Many others
Mini OBD2 Bluetooth 4.0 Scanner with Switch Specifications:
Communication: Bluetooth 4.0
Main control chip: ST
Support systems: IOS, Android, Symbian, Windows
Working voltage: 9v~16v
Working current: 35mA
Standby current: 25mA
Working temperature: - 40 ℃~85 ℃
Working humidity: less than 60%
Size: 43mm * 25mm * 30mm
Packing list:
1 mini OBD2 Bluetooth 4.0 scanner with power switch
1 x box
Copyright © 2023 连城实业有限公司 版权所有